© MightyKnittyMachines - Knitting Machine Encyclopedia

Category: charting device

  • Knit Radar K-2

    Knit Radar K-2

    Knit radar K2 is almost identical to the Knit radar KR5 about which I already wrote a very detailed blog. Thus, refer to it while checking out pictures below of the K-2 knit radar model.

  • Knit Radar KR5

    Knit Radar KR5

    Knit Radar KR-5 was released under the Empisal Knitmaster and Silver Reed to accessorized knitting machines manufactured under the Silver/Singer/Studio/Silver Reed/Empisal/Riccar brand names. KR5 model has some distinct differences from its later couterpart: KR6 (check out the corresponding post and you will see them right away). Thus, it is hard to say if KR5 is…

  • Knit Radar KR6

    Knit Radar KR6

    Silver Reed or Silver Knit Radar KR6 is compatible with a huge variety of knitting machines (that already do not have a built-in knit leader) manufactured under the brand names Singer/Silver/Silver Reed/Studio/Empisal/Riccar. It attaches to the case of the knitting machines and sits on the side (like shown for another knit leader on the machine…

  • Silver Reed KR10 Knit radar

    Silver Reed KR10 Knit radar

    Knit radar KR10 fits a lot (if not all) knitting machines (standard and other gauges) manufactured under the Silver/Silver Reed/Singer/Studio/Riccar/Empisal brand names. It can use 1/2 and 1/4 scale patterns. It still uses the physical stitch scales *rulers with the numbers equal to the gauge calculated from your swatch). It is electronic charting device and…

  • Knit Radar K-3

    Knit Radar K-3

    Charting accessory Knit Radar K-3 fits knitting machines manufactured under the Silver/Silver Reed/Studio/Singer/Riccar/Empisal brand names. This is a compact device accepting the half-width charting sheets. Stay tuned as I am figuring out which specific model numbers this knit radar fits. Other knit radars for the Silver/Studio/Silver Reed/Singer/Empisal/Riccar knitting machines are KR5, KR6, and KR7.

  • Knit Contour KR21

    Knit Contour KR21

    Knit Contour KR-21 is an electronic charting device that fits electronic Singer/Silver Reed/Studio knitting machines with model numbers SK830, SK840, SK860, SK890, SK580. It might be compatible with some other models as well. Its manual is available online for free. The Internet has a lot of resouces on how to use it. Stay tuned for…

  • Knit Contour KR-7

    Knit Contour KR-7

    Knit radar KR7 is called interchangeably a Knit Contour KR7. Thus, read a corresponding detailed post dedicatd to Knit Radar KR-7.

  • Knit Radar KR7

    Knit Radar KR7

    Knit radar KR7 is called interchangeably a Knit Contour KR7. It is compatible and attaches to a variety of Singer/Silver Reed/Studio/Riccar/Empisal knitting machines, standard, bulky and fine. I had a chance to briefly work with one as I was preparing it for a customer (see a video and read a blog post). It is nice…

  • Knitking KL116 knit leader

    Knitking KL116 knit leader

    Charting devices Knitking KL116 is just another name for a Brother KL116 knit leader. Thus, read the corresponding post.

  • Brother KL117 knit leader

    Brother KL117 knit leader

    There is not much information on the Brother KL117 knit leader but it is very similar to the Brother KL116 charting device (so read my article on KL116). The minor difference I identified so far is the color scheme (I’ve seen two different color combos – white/grey and white/light-orange). Judging by the Japanese writing even…

  • Brother KL115 knit leader

    Brother KL115 knit leader

    There is not much information on the Brother KL115 knit leader but it is very similar to the Brother KL116 charting device (so read my article on KL116). The minor differences I identified so far is that KL115 has no biding wire in its standard set of assesories and the setting plates look a bit…

  • Brother KL116 knit leader

    Brother KL116 knit leader

    Brother KL116 knit leader is probably the most popular model of a charting device manufactured back in the times when Brother still made knitting machines. It fits a huge majority of Brother knitting machines, from pushbutton KH710 to punchcard KH890 to electronic KH970. It even fits bulky Brother knitting machines, like KH230, KH260 and KH270.…