Category: JUKI
-
JUKI K-883, One Touch Auto S knitting machine.
JUKI K-883 is a standard-gauge machine, with 200 needles, 4.5 mm apart. With the exception of its pleasant green-ish color, this machine is very similar to its two other counterparts: JUKI K881 and JUKI K882. Thus, read the corresponding posts, while enjoying the pictures below. Check out the very last picture as it shows the…
-
JUKI K881, One Touch Auto S, knitting machine
JUKI K-881 One Touch Auto S knitting machine is very similar to another standard-gauge JUKI knitting machine with the same eight pushbuttons: JUKI K-882, and JUKI K-883, both “One Touch Auto S”. Thus, read the corresponding post while enjoying the pictures below of this pretty red-colored machine (JUKI K882 is blue and JUKI K883 is…
-
JUKI One touch Auto S K-882 knitting machine
JUKI K 882 has 200 needles, 4.5 mm apart, which makes it a standard-gauge knitting machine. The machine has eight pushbuttons which activate (i.e., push forward) the needles are when the ratchet tool is turned. The pushed-forward needles then help to form various stitches depending on the carriage settings. This (as well as JUKI K881…
-
JUKI K 871, One Touch Auto, knitting machine
JUKI K 871 has 200 needles, 4.5 mm apart, which makes it a standard-gauge knitting machine. The machine has eight pushbuttons which activate (i.e., push forward) the needles are when the ratchet tool is turned. The pushed-forward needles then help to form various stitches depending on the carriage settings. There is no need to memorize…
-
JUKI K 861 knitting machine
JUKI K-861 is a first JUKI knitting machine to offer semi-automatic needle selection, accomplished by eight push-buttons. It is a standard-gauge machine with 200 needles, 4.5 mm apart. Thus, it could be considered a JUKI pioneer for the whole JUKI series of knitting machines. The screw-on carriage handle, S-shaped table clamps and slide-in tool holder…
-
JUKI K-841 knitting machine
JUKI K-841 is a standard-gauge knitting machine with 200 needles, 4.5 mm apart. Not much is available about this machine. Judging by its vintage row counter, JUKI K-841 was manufactured in Japan very likely in the early 1960s. Additionally, a unique tension mast is also seen in the machines manufactured up to the late 1960s…
-
JUKI K 851 knitting machine
JUKI K-851 is a standard-gauge, manual/basic knitting machine with 200 needles, 4.5 mm apart. This machine was manufactured in Japan very likely in the early 1960s judging by its vintage row counter, and 3-wire tension mast (capable of accommodating three different yarns). Such design of the tension mast included with the machines manufactured up to…
-
JUKI K 821 knitting machine
JUKI K-821 knitting machine is a truly vintage knitting machine. I could not find a manual for this machine. But judging by its similarity with the Silver Reed SK8 and Silver SK101, machines, it was very likely released onto the market in the late-1950s/early-1960s (see my collaborations on why below). I could not find a…