Choose articles:

LATEST POSTS

  • Empisal KH-610 knitting machine

    Empisal KH-610 knitting machine

    Also known as Empisal KH610 Computamatic, this knitting machine has 200 needles, 4.5 mm apart, which makes is a standard-gauge. The pictures below so far are the only ones I could find. But it looks that this machine is similar to Empisal KH680, as well as Brother KH587, Brother KH588, and Brother KH601.

  • Empisal KH680 knitting machine

    Empisal KH680 knitting machine

    Empisal KH680 knitting machine features 200 needles, 4.5 mm apart. Thus standard-gauge machine has a patterning center with eight pushbuttons to allow for semi-automatic needle selection. The machine comes with a lace carriage. The carriage handle is a screw on: Comptabitle ribbers are Brother KR580 (I used KR580 on KH585 and the needlebeds and carriages…

  • Empisal Knitmaster mod. 100 knitting machine

    Empisal Knitmaster mod. 100 knitting machine

    Empisal Knitmaster mod. 100 knitting machine is a standard-gauge machine with 200 needles, 4.5 mm apart. It is capable of only manual needle manipulation so it can knit only basic stitches. The carriage is very simple too. When I tried to compare this machine to any other model but under a different brand, I could…

  • Empisal Knitmaster 321 knitting machine

    Empisal Knitmaster 321 knitting machine

    Empisal Knitmaster 321 knitting machine is a standard-gauge knitting machine with 200 needles, 4.5 mm apart. The machine has punchcard reader that allows for the automatic needle selection to knit patterns automatically. Empisal Knitmaster 321 is a rebranded clone of Studio mod. 321, Silver SK-321, Singer MemoMatic 321. Thus, read the corresponding posts. Other similar…

  • Empisal Knitmaster 326 knitting machine

    Empisal Knitmaster 326 knitting machine

    Empisal Knitmaste 326 appeared knitting machine on the market in the mid-1970s. It is a standard-gauge knitting machine, with 200 needles, 4.5 mm apart. It has a built-in knit leader and punchcard reading mechanism for creating patterned textile fabrics. It has two clone sisters – Silver SK-326 and Studio mod. 326 (with all the same…

  • Singer SRP50 ribbing attachment

    Singer SRP50 ribbing attachment

    … in progress while I am working on one and discovering its pros and cons. Singer SRP50 ribber, similar to its identical sisters, Empisal Knitmaster SRP50, Studio SRP50, Silver SRP50 and Silver Reed SRP50 is compatible with a wider variety of Singer/Silver Reed/Studio/Empisal/Riccar standard-gauge knitting machines. I personally worked with couple of SRP50 ribbers and…

  • Silver SRN321 ribbing attachment

    Silver SRN321 ribbing attachment

    Silver SRN321 ribber is identical to Studio SRN321 ribber, I worked with (watch the video and read a blog). Thus, it is compatible with the same knitting machines: Studio mod. 321, Singer MemoMatic 321 and Silver SK321 standard-gauge 200-needle knitting machines. According to the manual, these ribbers are also compatible with with Silver SK305, Empisal Knitmaster…

  • JUKI K 871, One Touch Auto, knitting machine

    JUKI K 871, One Touch Auto, knitting machine

    JUKI K 871 has 200 needles, 4.5 mm apart, which makes it a standard-gauge knitting machine. The machine has eight pushbuttons which activate (i.e., push forward) the needles are when the ratchet tool is turned. The pushed-forward needles then help to form various stitches depending on the carriage settings. There is no need to memorize…

  • JUKI K 861 knitting machine

    JUKI K 861 knitting machine

    JUKI K-861 is a first JUKI knitting machine to offer semi-automatic needle selection, accomplished by eight push-buttons. It is a standard-gauge machine with 200 needles, 4.5 mm apart. Thus, it could be considered a JUKI pioneer for the whole JUKI series of knitting machines. The screw-on carriage handle, S-shaped table clamps and slide-in tool holder…

  • Silver SC-3 linking carriage.

    Silver SC3 cast-off or linking carriage is a cute accessory for the Silver/Silver Reed/Singer/Elna/Studio/Empisal/Empisal Knitmaster/Knitmaster/Riccar. I recently had a pleasure to use one for my projects and I loved it (watch a video here; pictures are coming soon). This carriage allows to bind-off the last row on your knitted panel on most machines (according to…

  • JUKI K-841 knitting machine

    JUKI K-841 knitting machine

    JUKI K-841 is a standard-gauge knitting machine with 200 needles, 4.5 mm apart. Not much is available about this machine. Judging by its vintage row counter, JUKI K-841 was manufactured in Japan very likely in the early 1960s. Additionally, a unique tension mast is also seen in the machines manufactured up to the late 1960s…

  • Studio SRP50 ribbing attachment

    Studio SRP50 ribbing attachment

    Studio SRP50 ribber was released to the market in the late 1970s to convert standard-gauge metal flat bed machines manufactured by Silver Reed and its subsidiaries (Singer, Silver, Studio, Riccar, Empisal Knitmaster) into double bed machines. Studio SRP50 ribber has 200 needles, 4.5 mm apart. Studio SRP50 fits a large variety of Studio knitting machines,…