Category: Type
-
Empisal Knitmaster 326 knitting machine
Empisal Knitmaste 326 appeared knitting machine on the market in the mid-1970s. It is a standard-gauge knitting machine, with 200 needles, 4.5 mm apart. It has a built-in knit leader and punchcard reading mechanism for creating patterned textile fabrics. It has two clone sisters – Silver SK-326 and Studio mod. 326 (with all the same…
-
Singer SRP50 ribbing attachment
… in progress while I am working on one and discovering its pros and cons. Singer SRP50 ribber, similar to its identical sisters, Empisal Knitmaster SRP50, Studio SRP50, Silver SRP50 and Silver Reed SRP50 is compatible with a wider variety of Singer/Silver Reed/Studio/Empisal/Riccar standard-gauge knitting machines. I personally worked with couple of SRP50 ribbers and…
-
Silver SRN321 ribbing attachment
Silver SRN321 ribber is identical to Studio SRN321 ribber, I worked with (watch the video and read a blog). Thus, it is compatible with the same knitting machines: Studio mod. 321, Singer MemoMatic 321 and Silver SK321 standard-gauge 200-needle knitting machines. According to the manual, these ribbers are also compatible with with Silver SK305, Empisal Knitmaster…
-
JUKI K 871, One Touch Auto, knitting machine
JUKI K 871 has 200 needles, 4.5 mm apart, which makes it a standard-gauge knitting machine. The machine has eight pushbuttons which activate (i.e., push forward) the needles are when the ratchet tool is turned. The pushed-forward needles then help to form various stitches depending on the carriage settings. There is no need to memorize…
-
JUKI K 861 knitting machine
JUKI K-861 is a first JUKI knitting machine to offer semi-automatic needle selection, accomplished by eight push-buttons. It is a standard-gauge machine with 200 needles, 4.5 mm apart. Thus, it could be considered a JUKI pioneer for the whole JUKI series of knitting machines. The screw-on carriage handle, S-shaped table clamps and slide-in tool holder…
-
Silver SC-3 linking carriage.
Silver SC3 cast-off or linking carriage is a cute accessory for the Silver/Silver Reed/Singer/Elna/Studio/Empisal/Empisal Knitmaster/Knitmaster/Riccar. I recently had a pleasure to use one for my projects and I loved it (watch a video here; pictures are coming soon). This carriage allows to bind-off the last row on your knitted panel on most machines (according to…
-
JUKI K-841 knitting machine
JUKI K-841 is a standard-gauge knitting machine with 200 needles, 4.5 mm apart. Not much is available about this machine. Judging by its vintage row counter, JUKI K-841 was manufactured in Japan very likely in the early 1960s. Additionally, a unique tension mast is also seen in the machines manufactured up to the late 1960s…
-
Studio SRP50 ribbing attachment
Studio SRP50 ribber was released to the market in the late 1970s to convert standard-gauge metal flat bed machines manufactured by Silver Reed and its subsidiaries (Singer, Silver, Studio, Riccar, Empisal Knitmaster) into double bed machines. Studio SRP50 ribber has 200 needles, 4.5 mm apart. Studio SRP50 fits a large variety of Studio knitting machines,…
-
Janome CH-1800 knitting machine.
Janome CH1800 knitting machine is a rebranded Corona CH-1800 and/or Genie CH1800 knitting machines. The same machine also came under as Koyo CH1800. Thus, read the corresponding posts while enjoying the pictures below. It looks like it could be accessorized with a ribber (stay tuned while I am figuring out the model number).
-
Friend knitting machines
I found pictures of several models of Friend knitting machines but I could not determine their model numbers. Thus, I included all of those (currently four) machines into one page. My research did not show so far any information at all!! I am looking for somebody to translate (from Japanese) one manual I found online…