Category: Gauge
-
Silver SK-312 knitting machine
Silver SK312 knitting machine was manufactured in the very late 1960s. It is a standard-gauge knitting machine with 200 needles, 4.5 mm apart. It has punchcard (with 24 holes in one row) reading capabilities, which allows automatic needle selection based on the wholes determining the patterns. It might have been released to the Japanese markets…
-
Silver SK-311 card-matic knitting machine
Silver SK-311 knitting machine first appeared on the market in the later 1960s. It might be the first machine capable of reading punchcards for automatic needle selection and patterning. In fact it is the first model (and so far as I’ve seen, the only) with the “card-matic” words in the name. Silver SK311 takes punchcards…
-
Silver SK-330 knitting machine
Silver SK-330 knitting machine very likely (due to several advanced features, discussed below) appeared on the market at the very beginning of the 1980s. Silver SK330 is a standard-gauge knitting machine with 200 needles, 4.5 mm apart, and punchcard reading and patterning capabilities. It has a built-in knit leader and other “more modern” features, similar…
-
Silver SK-328 knitting machine
Silver SK328 knitting machine, a standard-gauge knitting machine with 200 needles, 4.5 mm apart, appeared on the market in 1978. It can automatically pattern (and select needles) using the punchcard reading mechanism. Silver SK328 has a built-in knit leader. Its unique color combination makes this machine stand out from previous models. This model is also…
-
Silver SK-325 knitting machine
Silver SK-325 appeared on the market in the mid-1970s. It is a standard-gauge knitting machine, with 200 needles, 4.5 mm apart. Silver SK325 accepts punchcards to create patterns by mechanically selecting needles according to the holes in these punchcards. It is potentially the first model to have a built-in knit leader. Except for the color,…
-
Silver SK-326 knitting machine
Silver SK-326 appeared on the market in the mid-1970s. It is a standard-gauge knitting machine, with 200 needles, 4.5 mm apart. Silver SK326 accepts punchcards to create patterns by mechanically selecting needles according to the holes in these punchcards. Note that this model (unlike its earlier counterparts with just one lever) has two levers on…
-
Silver SK-327 knitting machine
Silver SK327 was released in the mid-to-late 1970s. It is a standard-gauge knitting machine with 200 needles, 4.5 mm apart. There are other knitting machines with the same model number but branded as Studio and/or Singer. It is very likely that Silver SK327 was released specifically for the Japanese markets (I can only find models…
-
Silver Reed SRJ70 ribbing attachment
Silver Reed SRJ70 ribber is an attachment to standard-gauge (4.5 mm) knitting machines manufactured by Silver/Silver Reed and is also branded under the Singer and Studio names. It has 200 needles in the needle bed, 4.5 mm apart from each other. The ribber comes with a standard set of accessories, which includes clamps, barrel weights,…
-
Studio SK-105 knitting machine
Studio SK105 knitting machine is often also called Silver SK105. Thus, read a detailed article dedicated to the Silver SK105 machine. This whole Studio SK105 versus Silver SK105 is a bit strange: both machines can have cases with the “Studio” written on the case lid, but “Silver” written on the accessories, and then again “Studio”…
-
Silver SK-105 knitting machine
Silver Sk105 knitting machine first appeared on the market in the mid-1960s. It is a standard-gauge knitting machine with 200 needles, 4.5 mm apart. The naming/branding of this machine is a bit confusing. Very often I see machines with “Studio” written on the case and on the main carriage, but “Silver” branding next to the…