Category: turn-knobs on the carriage
-
Janome CH-1800 knitting machine.
Janome CH1800 knitting machine is a rebranded Corona CH-1800 and/or Genie CH1800 knitting machines. The same machine also came under as Koyo CH1800. Thus, read the corresponding posts while enjoying the pictures below. It looks like it could be accessorized with a ribber (stay tuned while I am figuring out the model number).
-
Corona CH-1800 knitting machine
Corona CH-1800 is a standard-gauge Japanese-made knitting machine with 200 needles, 4.5 mm apart. Corona CH1800 knitting machine was also released under the Koyo CH1800 name. The carriage is probably the most complex carriage (with all these various levers, knobs, buttons, dials, etc…) Unlike most machines with mechanical patterning capabilities, all the patterning settings are…
-
Corona CH-1600 knitting machine
There is not a lot of information on this machine except for pictures. However, it looks and very likely operates very similar to the Corona CH1700 and Corona CH1500 knitting machines; thus, refer to the corresponding articles. Corona CH-1600, similar to Corona CH-1500, has weaving yarn feeders on the carriage. Thus, if you cannot find information…
-
Corona CH-707 knitting machine
Corona Temic CH-707 knitting machine, similarly to the Corona Temic CH-501, is a mysterious machine with barely any information on the Internet about it. So if you are reading it and know anything or have a manual or have the actual machine, please get in touch with me. Corona CH-707 is a very likely a…
-
Corona Temic CH-501 knitting machine
Corona Temic CH-501 knitting machine is a very interesting-looking model, with barely any information on the Internet about it. So if you are reading it and know anything or have a manual or have the actual machine, please get in touch with me. Corona Temic CH-501 is a very unique-looking. It looks like a standard-gauge…